1028U-TN10RT+ (Complete System Only)

1. Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v3 family; QPI up to 9.6GT/s
2. Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
3. 3x PCI-E 3.0 x8 slots, (2x FH 10.5" L, 1x LP)
4. 2x 10GBase-T ports
5. 10x 2.5" Hot-swap Drive Bays: 6x NVMe ports (NVMe from CPU 1); 4x NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2)
6. 8x heavy duty fans w/ optimal fan speed control
7. 1000W Redundant Power Supplies, Titanium Level (96%)

Price available upon request.

Product Specifications

Product SKUs
SYS-1028U-TN10RT+ 
  • SuperServer 1028U-TN10RT+ (Black)
Motherboard
X10DRU+
Processor/Cache
CPU
  • Intel Xeon processor E5-2600 v3 family (up to 160W TDP)
  • Dual Socket R3 (LGA 2011) 
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache 
System Bus
  • QPI up to 9.6 GT/s 
Notes
  • Please contact Technical Support for additional information about frequency optimised CPUs and specialised system optimisation.
System Memory
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 1.5TB ECC LRDIMM, RDIMM 
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 
DIMM Sizes
  • 64GB, 32GB, 16GB, 8GB, 4GB 
Memory Voltage
  • 1.2 V 
Error Detection
  • Corrects single-bit errors 
On-Board Devices
Chipset
  • Intel C612 chipset 
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10 
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC 
Network Connectivity
  • 2x 10GBase-T ports via AOC-URN6-i2XT
  • Intel X540 10GBase-T
  • 1x Realtek RTL8211E PHY (dedicated IPMI) 
Graphics
  • ASPEED AST2400 BMC
Input / Output
NVMe/SAS
  • 6 NVMe ports (NVMe from CPU 1)
  • 4 NVMe/SAS3 Hybrid ports (NVMe from CPU 2) 
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port 
USB
  • 5 USB 3.0 ports
    (2 rear, 2 front, 1 Type A) 
Video
  • 1 VGA Connector 
Serial Port
  • 1 Serial header 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS 
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • SuperDoctor 5
  • Intel Node Manager 3.0
  • Watch Dog
  • NMI
  • SMCBU and SMM
  • Optional IPMI 1.5 / 2.0 
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery 
Chassis
Form Factor
  • 1U Rackmount 
Model
  • CSE-119UAC2-R1K02
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm) 
Depth
  • 27.82" (707mm)
Weight
  • 48 lbs (21.8 kg)
Available Colour
  • Black 
Front Panel
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • UID LED 
Expansion Slots
PCI-Express
  • 3x PCI-E 3.0 x8 slots (2x Full-height 10.5" L; 1x Low-profile)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers.)
Drive Bays
Hot-swap
  • 10x 2.5" Hot-swap drive bays
  • 6x NVMe ports (NVMe from CPU 1)
  • 4x NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2) 
System Cooling
Fans
  • 8x heavy duty fans with optimal fan speed control 
Air Shroud
  • 1x Air Shroud 
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power
  • 800W/1000W
Dimension (W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127 V, 50-60 Hz
  • 200-240 V, 50-60 Hz 
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 83A (200Vac-240Vac) & Min: 0A 
12Vsb
  • Max: 2.1A
  • Min: 0A 
Output Type
  • 25 Pairs Gold Finger Connector
Certification
  • 80 PLUS
  • UL/cUL/CB/BSMI/CE/CCC
  • Titanium Level
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator 
FAN
  • 8x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors 
Temperature
  • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI 
LED
  • Memory DIMM ECC error LEDs
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID 
Other Features
  • 4x 8-pin GPU power connectors
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS 
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

Any questions or need more product information?

If you have any questions about this product or have any feedback about this page please complete the form and one of our Technical Sales Team will get back to you as soon as possible.

Alternatively, if you need an immediate answer please call our Technical Sales Team on: 01438 842 300

Please visit our contact us section for opening times or if you require customer service assistance.

Sign Up to Our Free Newsletter for Expert Information & News