Supermicro X9DRD-EF

1. Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600 and E5-2600 v2 family
2. Intel C602J chipset
3. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
4. Expansion slots: 6 (x8) PCI-E 3.0
5. Intel i350 Dual port GbE LAN
6. 4x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with dedicated LAN
8. 9x USB 2.0 ports (4 rear, 4 via header + 1 Type A)

Price available upon request.

Product Specifications

Product SKUs
Retail Box SKU 
  • MBD-X9DRD-EF-O
OEM (only bundles of 10) SKU
  • MBD-X9DRD-EF-B
Physical Stats
Form Factor
  • E-ATX
Dimensions
  • 12" x 13" (30.5cm x 33.0cm)
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel Xeon processor E5-2600     
  • E5-2600 v2 family (up to 135W TDP **)
Cores / Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Notes
  • ** Motherboard supports this maximum TDP. Please verify your system can thermally support
  • BIOS version 3.0 or above is required
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
  • Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,  64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel C602J chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10  SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A)
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Video
  • 1 VGA port
Serial Port
  • 2 Fast UART 16550 ports (rear/header)
Chassis
2U Chassis
Tower / 4U Rackmount
  • CSE-846BA-R1K28B
  • CSE-846BE16-R1K28B
  • CSE-846BE26-R1K28B
  • CSE-847A-R1400B
  • CSE-847A-R1K28LPB
  • CSE-847E16-R1400B
  • CSE-847E16-R1K28LPB
  • CSE-847E26-R1400B
  • CSE-847E26-R1K28LPB
SuperServer(s) with X9DRD-EF
  • SYS-6017R-TDF+
  • SSG-6027R-E1CR12L
  • SSG-2027R-E1CR24L
  • SSG-6047R-E1CR36L
Important Chassis Notes:
  • To support the new generation Intel Xeon processor-based motherboards, Revision M chassis is recommended.
Expansion Slots
PCI-Express
  • 6 (x8) PCI-E 3.0 slots
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • SuperDoctor III
  • Watch Dog
  • NMI
  • IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News