R2G-5600V4V

1. Wattage: 600w
1. Voltage: 100~240 VAC
2. Frequency: 50Hz/60Hz (+/-3Hz
3. Steady State Current: 9.0~4.0 AMPS MAXIMUM AT ANY LOW/HIGH RANGE INPUT VOLTAGE
4. Inrush Current: 35A/70A @ 115/230 VAC
5. Active PFC PHC CAN REACH THE TARGET OF 95% @ 230V, FULL LOAD
6. Temperture Range 0℃ ~ 40℃
7. Dimensions 276x101x82(mm)

Price available upon request.

Product Specifications

Wattage
600W
Dimensions
276x101x82(mm)
10.87x3.98x3.23(inch)
Input Specification
VOLTAGE: FULL RANGE 100~240 VAC
FREQUENCY: 50Hz/60Hz (+/-3Hz)
STEADY-STATE CURRENT: 9.0~4.0 AMPS MAXIMUM AT ANY LOW/HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 35A/70A @ 115/230 VAC
POWER FACTOR CORRECTION: PHC CAN REACH THE TARGET OF 95% @ 230V, FULL LOAD
                
Features
TEMPERATURE RANGE: OPERATING: 0 ℃ ~ 40 ℃, STORAGE:  -20 ℃ ~ 80 ℃
 HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
 EFFICIENCY: >80% TYPICAL AT 115V, 20~100% MAX LOAD
 POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms
 OVER POWER PROTECTION: 110~180%
 OVER VOLTAGE PROTECTION: +5V: 5.9~6.7V, +3.3V: 3.9~4.3V, +12V: 13~15V
 OVER CURRENT PROTECTION: +3.3V: 27.5~37.5A, +5V: 27.5~37.5A, +12V: 52.8~76.8A
 SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V
 SAFETY: TO MEET UL, CUL, TUV, CCC
 REMOTE ON/OFF CONTROL
 WARNING METHOD: AUDIO ALARM, FAULT LED, TTL
DC Output Specification
Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noice Max.[P-P]
5V 0.5 25 ±5% ±50mV 50mV
12V 2.0 48 ±5% ±120mV 120mV
-5V N/A N/A N/A N/A N/A
-12V 0.2 0.8 ±10% ±120mV 120mV
3.3V 0.5 25 ±5% ±50mV 50mV
+5VSB 0.1 3.5 ±5% ±50mV 50mV
Remarks:
* TOTAL OUTPUT MAX: 600W                     
* +5V AND +3.3V TOTAL OUTPUT MAX: 170W

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY REGULATIONS.

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News