M1Z3-6760P3V

1. Wattage: 760w
2. VOLTAGE: 90V ~ 264VAC
3. TEMPERATURE RANGE: OPERATING: 0℃ --- 40℃
4. STORAGE: -20℃ - 80℃
5. Dimensions 265x101x125(mm)

Price available upon request.

Product Specifications

Wattage
760W
Dimensions
265x101x125(mm)
10.43x3.98x4.92(inch)
Input Specification
VOLTAGE:  90V ~ 264VAC 
FREQUENCY: 47Hz ~ 63Hz 
INPUT CURRENT: 20-10A MAX AT ANY LOW/HIGH INPUT VOLTAGE                   
INRUSH CURRENT: 60/100A @ 115/230VAC (25℃)
POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD
Features
 TEMPERATURE RANGE: OPERATING: 0℃ --- 40℃
 STORAGE:  -20℃ --- 80℃
 HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
 REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
 HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
 DIELECTRIC WITHSTAND: INPUT / OUTPUT 3000 VAC FOR 1 SECOND
 INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
 EFFICIENCY: 65% TYPICAL AT 115VAC FULL LOAD
 POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
 OVER POWER PROTECTION: 110% ~ 180%
 OVER VOLTAGE PROTECTION: +5V -> 5.7V ~ 6.5V, 3.3V ->3.9V ~ 4.7V +12V  -> 13.3V ~ 14.3V
 OVER CURRENT PROTECTION: 110% ~ 180%
 SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V
 EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
 SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950 
 REMOTE ON / OFF CONTROL
 THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY),
 AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE,
 AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.
 3.3V REMOTE SENSING
DC Output Specification
Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noice Max.[P-P]
5V 4 48 ± 5% ± 50mV 70mV
12V 0.2 1 +5%, -10% ± 50mV 120mV
-5V 5 50 ± 6% ± 50mV 120mV
-12V 0.2 1.5 +5%, -10% ± 50mV 120mV
3.3V 4 45 ± 5% ± 50mV 70mV
+5VSB 0.4 3.5 +5%, -6% ± 50mV 70mV
Remarks:
* THE OUTPUT POWER  OF 5V AND 3.3V MAX:40A
* EACH POWER MODULE  OUTPUT MAX:420W , TOTAL OUTPUT POWER MAX:760W

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY REGULATIONS.

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News