Supermicro C7X99-OCE-F-O

1. Single socket R3 (LGA 2011) supports
Intel® 4th gen. Core i7 series, Xeon®
processor E5-2600 v3, E5-1600 v3
2. Intel® X99 chipset
3. Up to 64GB non-ECC UDIMM DDR4,
frequency up to 3300MHz (OC);
8x DIMM slots
4. 4 PCI-E 3.0 x16 (run at 16/16/NA/8
or 16/8/8/8), 2 PCI-E 2.0 x1 (in x4)
5. Intel® i210-AT Dual port GbE LAN
Shared with IPMI
6. 10x SATA3 (6Gbps)
7. 1x VGA (Aspeed AST 2400 BMC for IPMI), 1x COM, 1x TPM
8. 8x USB 3.0 ports
(6 rear + 2 via header)
9. HD Audio 7.1 channel connector by
Realtek ALC1150

Price available upon request.

Product Specifications

Product SKUs
  MBD-C7X99-OCE-F -B
   
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 9.6", (30.5cm x 24.4cm)
Processor/Cache
CPU
  • Intel® 4th gen. Core™ i7 series, Intel® Xeon® processor E5-2600/ 1600 v3 family (up to 160W TDP **)
  •  Single Socket R3 (LGA 2011)
Cores / Cache
  • N/A
System Bus
  • N/A
Notes ** Motherboard supports this maximum TDP. Please verify your system can
thermally support
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Supports up to 64GB DDR4 Non-ECC Un-Buffered memory (UDIMM) in 8 DIMM slots
Memory Type
  • Frequency up to 3300MHz(OC) non-ECC DDR4 SDRAM 72-bit, 284-pin (UDIMM) gold-plated DIMMs
  • Support overclocking up to 3300MHz*
  • * Please check the operation manual for supported components
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.2V
Error Detection
  • None
On-Board Devices
Chipset
  • Intel X99 chipset
SATA
  • SATA3 (6Gbps) via Intel X99 controller
  • 10x SATA3 ports: 6x iSATA (RAID 0, 1, 5, 10) and 4x sSATA
SCU SATA
  • None
SAS
  • None
IPMI
  • None
Network Controllers
  • Intel® i210-AT Dual Port Gigabit Ethernet
  • Share with IPMI
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ASPEED AST2400 BMC (for IPMI only)
Audio
  • RealTek ALC1150 High Definition Audio
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
SAS
  • None
NVMe
  • None
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • Shared with IPMI
USB
  • 8x USB 3.0 ports (6 rear + 2 via header)
  • 4 of 8 USB 3.0 ports upgradable to 4x USB 3.1 (10Gbps) (2 rear + 2 via header) (This upgrade is BOM option for OEM only)
Audio
  • 7.1 HD Jacks
DOM
  • None
TPM
  • 1x TPM 1.2 20-pin Header
Video
  • 1x VGA (Aspeed AST 2400 BMC for IPMI)
Serial Port
  • 1x header
Chassis
:  
:  
:  
Important Chassis Notes:
  • To support motherboards based on Intel® Xeon® processor 5500/3500 series, Revision K or later chassis is recommended for most models. Please talk to your sales representative for details.
Expansion Slots
PCI-Express
  • 4x PCI-E 3.0 x16 slots (run at 16/16/NA/8 or 16/8/8/8)
  • 2x PCI-E 2.0 x1 (in x4) slots
    PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when Intel Core i7-5820K is installed
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.7.1
  • UEFI 2.3.1
  • RTC (Real Time Clock) Wakeup
Management
Software
Power Configurations
  • ACPI Power Management
  • Keyboard Wakeup from Soft-Off
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
FAN
  • Total of 5 fan headers supporting up to 5 fans
  • 5 fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS
 
   
   
   
   

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News