Supermicro 1028GQ-TRT

1. Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v4 / v3 family; QPI up to 9.6GT/s
2. Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400 MHz ; 16x DIMM slots
3. 4x PCI-E 3.0 x16 slots (4x GPU/Xeon Phi cards opt.), 2x PCI-E 3.0 x8 (in x16) LP slot
4. Dual port 10GbE LAN
5. 2x 2.5" Hot-swap drive bays, 2x 2.5" internal drive bays
6. 9x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control
7. 2000W Redundant Power Supplies, Platinum Level (94%+)

Price available upon request.

Product Specifications

Product SKUs
SYS-1028GQ-TXR
Motherboard
Super X10DGQ
Processor/Cache
CPU
  • Intel Xeon processor E5-2600 v4 / v3 family (up to 145W TDP)*
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes * Please contact Technical Support for additional
information about frequency optimised CPUs and specialised system
optimisation.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Dual Port 10GbE
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 4x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (2 via headers)
Video
  • 1x VGA Connector
Serial Port
  • 1x Serial header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Operating Environment / Compliance
RoHs RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-118GQE-R2K03P
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 35.2" (894mm)
  • 39.3" (997mm) with rails
Package
  • 24" (H) x 8" (W) x 46" (D)
Weight
  • Net Weight: 45 lbs (15.9 kg)
  • Gross Weight: 58 lbs (21.8 kg)
Available Coluor
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express
  • 4x PCI-E 3.0 x16 slots
    (4x GPU/Xeon Phi cards optional)
  • 2x PCI-E 3.0 x8 (in x16) low-profile slot
Drive Bays
Hot-swap
  • 2x 2.5" Hot-swap drive bays
Fixed
  • 2x 2.5" internal drive bays
System Cooling
Fans
  • 9x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control
Power Supply
2000W 1U Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/1800W/1980W/2000W
Dimension (W x H x L)
  • 73.5 x 40 x 265 mm
Input
  • 100-120Vac / 11.8-9.8A / 50-60Hz
  • 200-220Vac / 10-9.5A / 50-60Hz
  • 220-230Vac / 10-9.8A / 50-60Hz
  • 230-240Vac / 10-9.8A / 50-60Hz
  • 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V
  • Max: 83.3A / Min: 0.1A (100-120Vac)
  • Max: 150A / Min: 0.1A (200-220Vac)
  • Max: 165A / Min: 0.1A (220-230Vac)
  • Max: 166.7A / Min: 0.1A (230-240Vac)
  • Max: 166.7A / Min: 0.1A (200-240Vac) (UL/cUL only)
12V SB
  • Max: 3.5A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification 80+ Platinum Level
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • Total of nine 4-pin PWM fans
  • 9x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 9x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • SDDC Support

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News