Supermicro 6038R-TXR

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 1TB ECC DDR4 2133MHz;
16x DIMM slots
3. 10x PCI-E 3.0 x8 (FHFL) slots,
1x PCI-E 2.0 x4 (in x8) slot
4. Intel® i350 Dual port Gigabit Ethernet
5. 8x 3.5" Hot-swap drive bays,
2x 5.25" drive bays
6. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
7. 3x middle fans & 1x rear exhaust fan
8. 980W Redundant Power Supplies
Platinum Level (94%)

Price available upon request.

Product Specifications

Product SKUs
  SYS-6038R-TXR
Motherboard
MBD-X10DRX -O
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes
  • * Please contact Supermicro Technical Support for additional
    information about frequency optimized CPUs and specialized system
    optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Connectivity
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
DOM
  • 2x SuperDOM (Disk on Module) ports
TPM
  • 1x TPM 1.2 20-pin Header
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
  • 4x USB 2.0 ports (2 rear, 2 via headers)
Video
  • 1x VGA port
Serial Port
  • 2x COM ports (1 rear, 1 Header)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 3U Rackmount
Model
Dimensions and Weight
Height
  • 5.2" (132mm)
Width
  • 17.2" (437mm)
Depth
  • 25.5" (648mm)
Weight
  • 72 lbs (32.6kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System information (overheat/UID) LED
  • Power fail LED
Expansion Slots
PCI-Express
  • 10x PCI-E 3.0 x8 slots
  • 1x PCI-E 2.0 x4 (in x8) slot
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
Drive Bays

Hot-swap

Others

  • 8x 3.5" Hot-swap drive bays
  • 2x 5.25" drive bays
System Cooling
Fans
  • 3x 8cm 7K RPM, Middle fans
  • 1x 8cm 6.7K RPM, Rear Exhaust fan
Air Shroud
  • None
Power Supply
850W/980W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus
AC Input
  • 100-140 V, 50-60 Hz, 11.5-6.5 Amp
  • 180-240 V, 50-60 Hz, 6.5-4.5 Amp
DC Output
  •   4 Amp @ +5V Standby
  •   70 Amp @ +12V (100-140Vac)
  •   81 Amp @ +12V (180-240Vac)
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 28 Amp
  • -12V: 0.6 Amp
Certification 80+ Platinum Level
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
  • 6 Phase-switching voltage regulator
FAN
  • 11x 4-pin fan headers (up to 11 fans)
  • 11x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 11x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • Dual Cooling Zones
Operating Environment / Compliance
RoHs RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News