Supermicro 6047R-E1R36N

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family† 2. Up to 1.5TB ECC DDR3, up to
1866MHz; 24x DIMM sockets
3. 3x PCI-E 3.0 x16 and 1x PCI-E 3.0 x8
slots (Low-profile)
4. Intel® i350 GbE Controller; 4x ports
5. 36x Hot-swap 3.5" SAS2 (with LSI
expander) / SATA3 HDD Bays;
24 front + 12 rear HDD Bays
6. Hardware RAID controller and JBOD
Expansion; RAID 0, 1, 5, 6, 10, 50, 60
7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
8. 7x Heavy duty PWM fans
9. 1280W Redundant Power Supplies
Platinum Level (95%)

Price available upon request.

Product Specifications

Product SKUs
  6047R-E1R36N
Motherboard
MBD-X9DRi-LN4F+ -B
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600     and E5-2600 v2 family     (up to 130W TDP)
Cores / Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Notes
  • † BIOS version 3.0 or above is required
System Memory
Memory Capacity
  • 24x 240-pin DDR3 DIMM sockets
  • Up to 1.5TB DDR3 ECC LRDIMM
  • Up to 768GB DDR3 ECC Registered memory (RDIMM)
  • Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 Chipset

SATA/SAS

  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1, 5, 10
  • LSI 2108 SAS2 RAID AOC (BBU optional)

  • Hardware RAID 0, 1, 5, 6, 10, 50, 60
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Connectivity
  • Intel® i350 Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Input / Output
SATA
  • Matrox G200eW
SAS
  • LSI 2108 SAS2 RAID AOC
JBOD
  • 2x JBOD Expansion Ports
LAN
  • 4x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A)
Video
  • 1x VGA port
Serial Port
  • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type 64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
Dimensions and Weight
Height
  • 7" (178mm)
Width
  • 17.2" (437mm)
Depth
  • 27.5" (699mm)
Weight
  • Net Weight: 67 lbs (30.4 kg)
  • Gross Weight: 104 lbs (47.2 kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots
PCI-Express
  • 3x PCI-E 3.0 x16 slots (Low-profile)
  • 1x PCI-E 3.0 x8 slot (Low-profile)
Drive Bays

Hot-swap

Fixed

  • 36x Hot-swap 3.5" SAS / SATA HDD trays Double-sided: 24 front + 12 rear HDD Bays
  • Optional Internal Drive Bracket suppports 2x 2.5" or 1x 3.5" devices (up to 2 supported)
System Cooling
Fans
  • 7x 8cm hot-swap cooling fans
  • Redundant cooling
Air Shroud
  • None
Power Supply
1280W High-Efficiency (95%+) power supply
AC Input
  • 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
  • 1280W: +12V/106.7A, +5Vsb/4A
   
Certification 80+ Platinum Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News