Supermicro 5018D-MTF

1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3, 4th gen.
Core i3, Pentium, Celeron processors
2. Intel® C224 Express PCH
3. 4x 3.5" Hot-swap SATA3 HDD bays
4. 1x PCI-E 3.0 x8 (in x16) Full-height slot
5. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets
6. Dual Gigabit Ethernet LAN ports
(1x Intel® i217LM & 1x Intel® i210AT)
7. IPMI 2.0 on Dedicated LAN port
8. 350W Gold Level Power Supply

Price available upon request.

Product Specifications

Product SKUs
  SYS-5018D-MTF
Motherboard
MBD-X10SLM-F
Processor/Cache
CPU
  • Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
  • Socket H3 (LGA 1150)
Cores / Cache
  • N/A
System Bus
  • N/A
Notes
  • None
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM slots
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C224 Express PCH
SATA
  • SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
  • SATA2 (3Gbps) w/ RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC with 10/100/1000Mbps
Network Connectivity
  • Intel® i217LM + Intel® i210AT Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 4x SATA3 (6Gbps) ports
  • 2x SATA2 (3Gbps) ports
  • SATA DOM Power Connector
SAS 1 line
NVMe 1 line
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (1 Type-A, 2+1 via header)
  • 6x USB 2.0 ports (4 rear, 2 via header)
Video
  • 1x VGA port
Serial Port
  • 1x Fast UART 16550 serial port
  • 1x internal header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
Management
Software
  • IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
Chassis
Form Factor
  • 1U Rackmount
Model
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 19.8" (503mm)
Weight
  • Gross Weight: 30.4 lbs (13.8 kg)
  • Net Weight: 17.6 lbs (8 kg)
Available Color
  • Black
Front Panel
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x8 (in x16) Full-height slot*
Drive Bays
Hot-swap
  • 4x 3.5" Hot-swap SATA3 HDDs w/ RAID
System Cooling
Fans
  • 4x 4cm 12,500 RPM PWM fans
  • Optional fans to cool add-on cards
Air Shroud
  • None
Power Supply
350W AC power supply w/ PFC
AC Input
  • 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+12V
  • 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V standby
  • 3 Amp
Certification 80+ Gold Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of five 4-pin fan headers supporting up to 5 fans
  • 5x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Operating Environment / Compliance
RoHs
  • RoHS2 (2011/65/EU) Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News