How can we help? LIVE CHAT

  1. Home
  2. SuperServers
  3. Supermicro Servers
  4. 2U
  5. Twin
  6. Supermicro 2028TP-DNCR

Supermicro 2028TP-DNCR

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s

2. Up to 1TB ECC LRDIMM, 512GB ECC RDIMM, up to 2133MHz; 16x DIMM sockets

3. 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slots

4. Intel® i350 Dual port GbE LAN

5. Integrated IPMI 2.0 with KVM and Dedicated LAN

6. 4x NVMe and 8x 2.5" Hot-swap SAS drives

7. LSI 3008 SAS3 controller (8 ports); RAID 0, 1, 10

8. 1600W Redundant Power Supplies Titanium Level (96%)

Price available upon request.

Product Specifications

Product SKUs
  SYS-2028TP-DNCR
Motherboard
MBD-X10DRT-P -B
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes * Please contact Supermicro Technical Support for additional
information about frequency optimized CPUs and specialized system
optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • LSI 3008 SAS3 (12Gbps) controller;    RAID 0, 1, 10 support
  • Note: In order to support NVMe drives, both CPU socket must be populated
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Connectivity
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • None
SAS
  • 8x SAS3 (12Gbps) ports
Other
  • 1x mSATA (full size) and one SATADOM support on the daughter card
  • 1x SATADOM support on the motherboard
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports total (2x rear)
Video
  • 1x VGA port
Serial Port
  • 1x Fast UART 16550 port / 1 Header (internal)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-217HD+-R1K68B
Dimensions and Weight
Height
  • 3.47" (88mm)
Width
  • 17.25" (438mm)
Depth
  • 28.75" (730mm)
Weight
  • Gross Weight: 85 lbs (38.6kg)
  • Net Weight: 66 lbs (29.9 kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16 slot
  • 1x PCI-E 3.0 x8 slot
Drive Bays
Hot-swap
  • 8x 2.5" Hot-swap SAS HDD Bays
  • 4x 2.5" Hot-swap Bays support NVMe
System Cooling
Fans
  • 8x 2.5" Hot-swap SAS HDD Bays
  • 4x 2.5" Hot-swap Bays support NVMe
Air Shroud
  • None
Power Supply
1600W Titanium Level (96%) High-efficiency Redundant Single Output Power
Supplies
AC Input
  • 800W Output @ 100-140V, 7-10A, 50-60Hz
  • 1600W Output @ 180-240V, 8-11A, 50-60Hz
DC Output
  • 800W: +12V/67A, +5Vsb/1A
  • 1600W: +12V/133A, +5Vsb/1A
   
Certification 80+ Titanium Level
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory Voltages.
  • 6 Phase-switching voltage regulator
FAN
  • 2x 4-pin fan headers (up to 2 fans)
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors (2x fan on backplane)
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
   
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News