Supermicro F617R3-FT

8 Hot-plug System Nodes in 4U
Each node supports:
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Up to 512GB ECC DDR3, up to
1866MHz; 8x DIMM sockets
3. Expansion slot: 1 PCI-E 3.0 x16 (LP)
via riser card
4. I/O ports: 2 GbE ports, 1 Built-in video,
1 COM/Serial port, 2 USB 2.0 ports
5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port
6. 2 Fixed 3.5" SATA HDD Bays
7. 1620W Redundant Power Supplies
Platinum Level (94%)

Price available upon request.

Product Specifications

Product SKUs
  SYS-F617R3-FT
Motherboard
MBD-X9DRFF -B
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600    
  • E5-2600 v2 family     (up to 135W TDP *)
Cores / Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Notes
  • None
System Memory
Memory Capacity
  • 8x 240-pin DDR3 DIMM sockets
  • Up to 512GB DDR3 ECC LRDIMM
  • Up to 256GB DDR3 ECC Registered memory (RDIMM)
  • Up to 64GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 Chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1  SATA 3.0 6Gbps with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Connectivity
  • Intel® 82574L Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Input / Output
SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
SAS
  • None
NVMe
  • None
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 2.0 ports
Video
  • 1x VGA port
Serial Port
  • 1x Fast UART 16550 port
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Management
Software
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F418IL-R1K62B
Dimensions and Weight
Height
  • 6.96" (177mm)
Width
  • 17.63" (448mm)
Depth
  • 29" (737mm)
Weight
  • Net Weight: 150 lbs (68.04 kg)
  • Gross Weight: 200 lbs (90.71 kg)
Available Color
  • Black
Front Panel
LEDs
  • Black
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16 Low-profile via riser card
Drive Bays
Fixed
  • 2x Fixed 3.5" SATA HDD trays
System Cooling
Fans
  • 8x 8cm 11k RPM middle fans
Air Shroud 1 line
Power Supply
1620W high-efficiency redundant power supply w/ PMBus
AC Input
  • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz

DC Output

  • 1620W: +12V/150A; +5Vsb/4A
   
Certification
  • 80+ Platinum Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 4x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
   
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News