Supermicro 2028BT-HNC0R+ (Complete System)

Key Features:
Hyperscale and Hyperconverged Solutions
- Compute Intensive Application

- HPC, Data Center
- Enterprise Server


Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1.
 Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB ECC 3DS LRDIMM , up to DDR4- 2400 MHz ; 24x DIMM slots
3. 2 PCI-E 3.0 x16 (LP) slots; 1 SIOM card support (flexible networking) - Note: must bundle with Network card
4. IPMI 2.0 + KVM with dedicated LAN
5. 6 SAS3 or 4 NVMe + 2 SAS3 Hot-swap 2.5" drive bays
6. SAS3 support via LSI 3008; IT mode
7. Video via Aspeed AST2400 BMC
8. 4x 8cm heavy duty PWM fans with air shroud
9. 2200W Redundant Power Supplies Titanium Level
10. 2 M.2 Cards support

Price available upon request.

Product Specifications

Product SKUs
SYS-2028BT-HNC0R+ 
  • SuperServer 2028BT-HNC0R+ (Black)
Motherboard
Super X10DRT-B+
Processor/Cache (per Node)
CPU
  • Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes
  • BIOS version 2.0 or above is required
  • Please contact Technical Support for additional information about frequency optimised CPUs and specialised system optimisation.
System Memory (per Node)
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 3TB ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices (per Node)
Chipset
  • Intel C612 chipset
SAS
  • SAS3 (12Gbps) via LSI 3008; IT mode
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • KVM-over-LAN support
  • ASPEED AST2400 BMC
Network
  • Must bundle with at least one SIOM network card
Video
  • ASPEED AST2400 BMC
Input / Output (per Node)
SAS
  • 6 SAS (12 Gbps) ports
LAN
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
Video
  • 1 VGA port
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: 
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-217BHQ+-R2K22BP
Dimensions and Weight
Width
  • 17.6" (447mm)
Height
  • 3.47" (88mm)
Depth
  • 28.75" (730mm)
Package
  • 24.65" (H) x 9.76" (W) x 45.28" (D)
Weight
  • Net Weight: 85 lbs (38.6 kg)
  • Gross Weight: 54.5 lbs (24.7 kg)
Available Colour
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2 Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
  • 2 PCI-E 3.0 (x16) Low-profile slots
  • 1 SIOM card (must bundle with network card)
Drive Bays (per Node)
Hot-swap
  • 6 Hot-swap SAS3 drive bays or 4 NVMe + 2 SAS3 Hot-swap 2.5" 
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans with air shroud
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power
  • 1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)
  • 45 x 40 x 480 mm
Input
  • 100-127Vac / 50-60Hz (1200W)
  • 200-220Vac / 50-60Hz (1800W)
  • 220-230Vac / 50-60Hz (1980W)
  • 230-240Vac / 50-60Hz (2090W)
  • 180-220Vac / 50-60Hz (2090W)
  • 220-240Vac / 50-60Hz (2200W)
+12V
  • Max: 100A / Min: 0A (100-127Vac)
  • Max: 150A / Min: 0A (200-220Vac)
  • Max: 165A / Min: 0A (220-230Vac)
  • Max: 174.17A / Min: 0A (230-240Vac)
  • Max: 174.17A / Min: 0A (180-220Vac)
  • Max: 183.33A / Min: 0A (220-240Vac)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • Backplanes (connector)
Certification
  • 80 Plus
  • UL/cUL/CB/BSMI/CE/CCC
  • Titanium Level

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News