Supermicro 7048A-T

• Whisper Quiet Workstation
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 1TB reg. ECC DDR4 2133MHz;
16x DIMM slots
3. 3x PCI-E 3.0 x16, 2x PCI-E 3.0 x8, and
1x PCI-E 2.0 x4 (in x8) slot supports
Thunderbolt 2.0 AIC
4. Intel® i210 Dual port GbE LAN
5. 7.1 HD Audio
6. 8x 3.5" Hot-swap SATA HDD Bays
7. 1200W High Efficiency Power Supply
Platinum Level (94%)
8. Tower or Rackmount

Price available upon request.

Product Specifications

Product SKUs
  SYS-7048A-T
Motherboard
MBD-X10DAi -O
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes
  • * Please contact Supermicro Technical Support for additional
    information about frequency optimized CPUs and specialized system
    optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • None
Network Connectivity
  • Intel® i210 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
  • RealTek ALC888 7.1 High Definition Audio with S/PDIF header
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
SAS
  • None
Audio
  • 7.1 HD Audio with optical S/PDIF
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
USB
  • 6x USB 3.0 ports (4 rear + 2 via header)
  • 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
DOM
  • 1x DOM (Disk on Module) power connector
TPM
  • 1x TPM 1.2 20-pin Header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmountable / Tower
  • Optional Rackmount Kit
Model
Dimensions and Weight
Height
  • 17.8" (452mm)
Width
  • 7.0" (178mm)
Depth
  • 25.5" (648mm)
Weight
  • 71 lbs (32.2 kg)
Available Color
  • Black
Front Panel
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat / Fan Fail LED
Expansion Slots
PCI-Express
  • 3x PCI-E 3.0 x16 slots
  • 2x PCI-E 3.0 x8 slots
  • 1x PCI-E 2.0 x4 (in x8) slot supports Thunderbolt 2.0 AIC
Drive Bays

Hot-swap

Peripheral

  • 8x 3.5" Hot-swap SAS/SATA Drive Trays
  • 3x 5.25" Drive Bays
System Cooling
Fans
  • 2x 2800 RPM Fans
  • 1x 2700 RPM Fan
Air Shroud
  • None
Power Supply
1200W high-efficiency power supply w/ PMBus
AC Input
  • 1200W: 114.9-240 V, 50-60 Hz, 12-8 Amp
DC Output
  • 20A /  20A /   99A /  0.3A /   3A
Note:
  • Max. continuous combined load on +3.3V and +5V output shall not exceed 120W.
Certification
  • 80+ Platinum Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News