Supermicro 1028UX-CR-LL1

1. Dual Intel® Xeon® processor
    E5-2643 v3 (Haswell)

2. Default: 8x 8GB 2133MHz DDR4

    (16x DIMM slots, up to 1TB
    DDR4 2133MHz)

3. Expansion slots via riser card:

    2x PCI-E 3.0 x16, Full-heigh Full-length
    1x PCI-E 3.0 x8, Low-profile
    1x PCI-E 3.0 x8 SAS3 integrated

4. 4x Gigabit Ethernet LAN ports
 

5. Integrated IPMI 2.0 with KVM and
    Dedicated LAN

6. 10x 2.5" Hot-swap Drive Bays:

    8x SAS3 (LSI 3108), 2x SATA3,
    2x NVMe ports support via
    optional Ultra Riser card

7. 8x heavy duty fans w/ optimal

    fan speed control

8. 750W Redundant Power Supplies

    Platinum Level (94%+)

Price available upon request.

Product Specifications

Product SKUs
 
  • 1028UX-CR-LL1 
Motherboard
X10DRU-XLL
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2643 v3
  • Dual Socket R3 (LGA 2011) 
Cores / Cache
  • Up to 6 Cores / Up to 20MB Cache 
System Bus
  • QPI up to 9.6 GT/s 
   
System Memory
Memory Capacity
  • 8 X 8GB DDR4 2133MHz (Default)
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 768GB ECC RDIMM 
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB 
Memory Voltage
  • 1.2 V 
Error Detection
  • Corrects single-bit errors 
On-Board Devices
Chipset
  • Intel® C612 chipset 

SATA

 

SAS

  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
  •  LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support 
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC 
Network Connectivity
  • 4x RJ45 Gigabit Ethernet ports
  • 1x RJ45 Dedicated IPMI LAN port 
Graphics
  • ASPEED AST2400 BMC 
Input / Output
SATA
  • 2x SATA3 (6Gbps) ports 
SAS
  • 8x SAS3 (12Gbps) ports 
NVMe
  • 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT)
LAN
  • 4x RJ45 Gigabit Ethernet ports
  • 1x RJ45 Dedicated IPMI LAN port 
USB
  • 5x USB 3.0 ports
    (2 rear, 2 via header, 1 Type A) 
Video
  • 1x VGA Connector 
Serial Port
  • 1x Fast UART 16550 serial
  • 1x COM port (rear) 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS 
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1 
   
Chassis
Form Factor
  • 1U Rackmount 
Model
  • CSE-119UTS-R750P
Dimensions and Weight
Height
  • 1.7" (43mm) 
Width
  • 17.2" (437mm) 
Depth
  • 30.6" (777mm)
Weight
  • 48 lbs (21.8 kg) 
Available Color
  • 48 lbs (21.8 kg) 
Front Panel
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED 
Expansion Slots
PCI-Express
    Expansion slots via riser card:
  • 2x PCI-E 3.0 x16, Full-heigh Full-length
  • 1x PCI-E 3.0 x8, Low-profile
  • 1x PCI-E 3.0 x8 SAS3 integrated 
Drive Bays
Hot-swap
  • 8x 2.5" Hot-swap SAS3 drive bays
  • 2x 2.5" Hot-swap SATA3 drive bays
  • Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports) 
System Cooling
Fans
  • 8x heavy duty fans with optimal fan speed control 
Air Shroud
  • 1x Air Shroud 
Power Supply
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input
  • 100-127Vac, 50-60Hz
  • 200-240Vac, 50-60Hz 
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 62.5A & Min: 0A (200Vac-240Vac) 
12V SB
  • Max: 2.1A
  • Min: 0A 
Certification Platinum Level
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator 
FAN
  • Total of ten 4-pin PWM fans
  • 10x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control 
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 10x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI 
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED 
Other Features
  • SDDC Support 
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing) 

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News