Supermicro 2048U-RTR4

• Quad Intel® Xeon® E5-4600 v3 Processors
• 48x DDR4 DIMM Slots, up to 3TB
• Up to 11x PCI-E 3.0 slots
• 4x Hot-Swap NVMe Bays support via optional NVMe AOC
• Flexible Connectivity Options

 1. Quad socket R3 (LGA 2011) supports

    Intel® Xeon® processor E5-4600 v3
    family; QPI up to 9.6GT/s

2. Up to 3TB ECC, up to DDR4 2133MHz;

    48x DIMM slots

3. 9x PCI-E 3.0 x8 slots,

    2x PCI-E 3.0 x16 slots

4. 4x GbE + 1x dedicated IPMI LAN ports
 

5. 24x Hot-swap 2.5" Drive Bays:
    4x Hybrid ports with NVMe
    support via extra AOC

6. 4x 8cm heavy duty fans
 

7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Price available upon request.

Product Specifications

Product SKUs
 
  • 2048U-RTR4 
Motherboard
X10QRH+
Processor/Cache
CPU
  • Intel® Xeon® processor E5-4600 v3 family (up to 135W TDP) *
  • Quad Socket R3 (LGA 2011) 
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache 
System Bus
  • QPI up to 9.6 GT/s 
Notes * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity
  • 48x 288-pin DDR4 DIMM slots
  • Up to 3TB ECC LRDIMM
  • Up to 1.5TB ECC RDIMM 
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB 
Memory Voltage
  • 1.2 V 
Error Detection
  • Corrects single-bit errors 
On-Board Devices
Chipset
  • Intel® C612 chipset 
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10 
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC 
Network Connectivity
Graphics
  • ASPEED AST2400 BMC 
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports 
SAS
  • 24x SAS3 ports support via optional Add-on Cards 
NVMe
  • 4x Hybrid ports with NVMe support via AOC 
LAN
  • 4x RJ45 GbE LAN ports
  • 1x RJ45 Dedicated IPMI LAN port 
USB
  • 5x USB 3.0 ports
    (2 rear, 2 via header, 1 Type A)
  • 2x USB 2.0 ports
    (2 via header) 
Video
  • 1x VGA Connector 
DOM
  • 2x SuperDOM (Disk on Module) ports 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS 
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1 
Management
Software
  • SuperDoctor® 5
  • Intel® Node Manager 3.0
  • Watch Dog
  • NMI
  • SMCBU and SMM
  • Optional IPMI 1.5 / 2.0 
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery 
Chassis
Form Factor
  • 2U Rackmount 
Model
  • CSE-218U-R1K02P
Dimensions and Weight
Height
  • 17.2" (437mm) 
Width
  • 3.5" (89mm) 
Depth
  • 30.7" (780mm) 
Weight
  • Net Weight: 43 lbs (19.4 kg)
  • Gross Weight: 69 lbs (31.2 kg) 
Available Color
  • Black 
Front Panel
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • System information (overheat/UID) LED 
Expansion Slots
PCI-Express
  • 9x PCI-E 3.0 x8 slots
    (include 4x PCI-E 3.0 x8 internal slots)
  • 2x PCI-E 3.0 x16 slots

    (4 CPUs need to be installed for full access to PCI-E slots and onboard controllers. See AOC Support for details.)
Drive Bays
Hot-swap
  • 24x 2.5" Hot-swap drive bays
  • Default 10x SATA3 ports (2x SATA3 ports for SATA DOM or internal HDD)
  • Optional 24x SAS3 ports via AOC
  • Optional 20x SAS3 ports via AOC + 4x NVMe ports via AOC

    Note: optional storage card is required to support more than 8 drives through backplane
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans 
Air Shroud N/A
Power Supply
1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input
  • 100-127 V, 50-60 Hz
  • 200-240 V, 50-60 Hz 
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 83A (200Vac-240Vac) & Min: 0A 
12V SB
  • Max: 2.1A
  • Min: 0A 
Certification  Titanium Level
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulat
FAN
  • 8x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors 
Temperature
  • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI 
LED
  • Memory DIMM ECC error LEDs
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID 
Other Features
  • 4x 8-pin GPU power connectors
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS 
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing) 

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News