Supermicro 6028UX-TR4

 Support Hyper-Speed

1. Dual socket R3 (LGA 2011) supports

    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s

2. Up to 1TB ECC, up to DDR4 2133MHz;

    16x DIMM slots

3. 3x PCI-E 3.0 x16 slot (FH, 10.5" L),

    3x PCI-E 3.0 x8 slots (1 in x16 FH
    10.5" L, 1 LP, 1 Internal LP)

4. 4x Gigabit Ethernet ports
 

5. 12x Hot-swap 3.5" Drive Bays:
    SATA3 default, 12x SAS3 opt.
    4x NVMe opt. via AOC

6. 4x heavy duty fans w/ optimal

    fan speed control

7. 1000W High efficiency (96%)

    Redundant PSU; Titanium Level

Price available upon request.

Product Specifications

Product SKUs
 
  • 6028UX-TR4 
Motherboard
X10DRU-X
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011) 
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache 
System Bus
  • QPI up to 9.6 GT/s
Notes * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM 
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB 
Memory Voltage
  • 1.2 V 
Error Detection
  • Corrects single-bit errors 
On-Board Devices
Chipset
  • Intel® C612 chipset 
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10 
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC 
Network Connectivity
Graphics
  • ASPEED AST2400 BMC 
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports 
SAS
  • 12x SAS3 ports support via optional Add-on Card 
NVMe
  • 4x NVMe ports support via optional Ultra Riser card (AOC-2UR8N4-i2XT) 
LAN
  • 4x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port 
USB
  • 5x USB 3.0 ports
    (2 rear, 2 onboard header, 1 Type A) 
Video
  • 1x VGA Connector 
DOM
  • 2x SuperDOM (Disk on Module) ports 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI® BIOS 
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1 
Management
Software

Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery 
Chassis
Form Factor
  • 2U Rackmount 
Model
  • CSE-829UTS-R1K02P
Dimensions and Weight
Height
  • 3.5" (89mm) 
Width
  • 17.2" (437mm)
Depth
  • 25.5" (647mm) 
Weight
  • 36 lbs (16.4kg) 
Available Color
  • Black 
Front Panel
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • System information (overheat/UID) LED 
Expansion Slots
PCI-Express
  • 3x PCI-E 3.0 x16 slot (FH, 10.5" L)
  • 3x PCI-E 3.0 x8 slots
    (1 in x16 FH 10.5" L, 1 LP, 1 Internal LP)

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap
  • 12x Hot-swap 3.5" Drive Bays:
    10x SATA3 ports by default
  • Optional SAS3 support: 12x SAS3
  • Optional NVMe support: 4x NVMe via AOC-2UR8N4-i2XT (2x 10GBase-T ports)

    Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans 
Air Shroud N/A
Power Supply
1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input
  • 100-127 V, 50-60 Hz
  • 200-240 V, 50-60 Hz 
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 83A (200Vac-240Vac) & Min: 0A 
12V SB
  • Max: 2.1A
  • Min: 0A 
Certification              Titanium Level
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing) 

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News