Supermicro X9DR7-TF+

1. Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600 and E5-2600 v2 family.
2. Intel C602J chipset; QPI up to 8.0GT/s
3. Up to 1.5TB ECC DDR3, up to 1866MHz; 24x DIMM slots* (depends on memory configuration) 
4. Expansion slots: 2 x16 PCI-E 3.0 and 4 x8 PCI-E 3.0
5. Intel® X540 Dual port 10GBase-T
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS2 ports via LSI 2208
8. Integrated IPMI 2.0 and KVM with dedicated LAN
9. 9x USB 2.0 ports  (4 rear, 4 via header + 1 Type A)

Price available upon request.

Product Specifications

Product SKUs
Retail SKU MBD-X9DR7-TF+-O
OEM SKU MBD-X9DR7-TF+ -B
Physical Stats
Form Factor
  • Enhanced E-ATX
Dimensions
  • 13.68" x 13" (34.7cm x 33cm)
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel Xeon processor E5-2600 and E5-2600 v2 family (up to 135W TDP **)
Cores / Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Notes
  • ** Motherboard supports this maximum TDP. Please verify your system can thermally support
  • BIOS version 3.0 or above is required
System Memory
Memory Capacity
  • 24x 240-pin DDR3 DIMM slots
  • Up to 1.5TB DDR3 ECC LRDIMM
  • Up to 768GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
  • Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel C602J chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS2 from LSI 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 devices as default, more HDD devices support is also available as an option
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O
  • Nuvoton W83527HG
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A)
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Video
  • 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A)
Serial Port
  • 2 Fast UART 16550 ports: 1 rear and 1 header
Chassis
Important Chassis Notes
  • To support the new generation Intel Xeon processor-based motherboards, Revision M chassis is recommended.
2U Chassis
3U Chassis
  • CSE-835BTQ-R1K28B
  • CSE-835TQ-R920B
  • CSE-836BA-R1K28B
  • CSE-836BE16-R1K28B
  • CSE-836BE26-R1K28B
Expansion Slots
PCI-Express
  • 2 (x16) PCI-E 3.0 slots
  • 4 (x8) PCI-E 3.0 slots
  • (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
BIOS Type
  • 2 (x16) PCI-E 3.0 slots
  • 4 (x8) PCI-E 3.0 slots
  • (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Main Switch Override Mechanism
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 9x 4-pin fan headers (up to 9 fans)
  • 9x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 9x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News