Supermicro-2028U-TRT+

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 1.5TB ECC, up to DDR4 2133MHz;
24x DIMM slots
3. 1x PCI-E 3.0 x16 slot (FH, 10.5" L),
7x PCI-E 3.0 x8 slots (5x FH, 10.5" L,
1x LP, 1x Internal LP)
4. 2x 10GBase-T ports 5. 24x Hot-swap 2.5" Drive Bays:
10x SATA3 ports by default;
Optional drive support: 24x SAS3
6. 4x heavy duty fans w/ optimal
fan speed control
7. 1000W High efficiency (96%)
Redundant PSU; Titanium Level

Price available upon request.

Product Specifications

Product SKUs
  SYS-2028U-TRT+
Motherboard
MBD-X10DRU-i+ -B
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes * Please contact Supermicro Technical Support for additional
information about frequency optimized CPUs and specialized system
optimization.
System Memory
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Connectivity
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
SAS
  • 24x SAS3 ports support via optional Add-on Cards
DOM
  • 2x SuperDOM (Disk on Module) ports
LAN
  • 2x 10GBase-T LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video
  • 1x VGA Connector
Serial Port
  • 1x Serial header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • SuperDoctor® 5
  • Intel® Node Manager 3.0
  • Watch Dog
  • NMI
  • SMCBU and SMM
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-219UAC-R1K02
Dimensions and Weight
Height
  • 3.5" (89mm)
Width
  • 3.5" (89mm)
Depth
  • 27.76" (705.3mm)
Weight
  • Net Weight: 36 lbs (16.4 kg)
  • Gross Weight: 72 lbs (32.7 kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • System information (overheat/UID) LED
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16 slot (FH, 10.5" L)
  • 7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap
  • 24x Hot-swap 2.5" Drive Bays: 10x SATA3 ports by default
  • Optional drive support: 24x SAS3
    Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans
Air Shroud
  • None
Power Supply
1000W Titanium Level (96%) High-efficiency Redundant Single Output Power
Supplies
AC Input
  • 100-127 V, 50-60 Hz
  • 200-240 V, 50-60 Hz
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 83A (200Vac-240Vac)
12V SB
  • Max: 2.1A
Certification 80+ Titanium Level
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Memory DIMM ECC error LEDs
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • 4x 8-pin GPU power connectors
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    5°C to 40°C (41°F to 104°F)
  • Non-operating Temperature:    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News