Supermicro 6028R-E1CR16T

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s 
2. Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400MHz ; 16x DIMM slots
3. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8
4. Dual 10GBase-T LAN w/ Intel® X540
5. 16x 3.5" Hot-swap drive bays: 12x 3.5" Hot-swap SAS3 drive bays and 4x NVMe hybrid drive bays (SAS3/SATA3/NVMe*); 2x 2.5" Hot-swap SATA drive bays (rear)
6. SAS3 via Broadcom 3108 controller, HW RAID
7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
8. 4x 8cm hot-swap redundant PWM cooling fans
9. 1000W Redundant Power Supplies Titanium Level

Price available upon request.

Product Specifications

Product SKUs
SYS--6028R-E1CR16T SuperServer 6028R-E1CR16T (Black)
Motherboard

Super X10DRH-CT

Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP)                                               *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note
  • BIOS version 2.0 or above is required
Notes * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • SAS3 (12Gbps) via Broadcom 3008
  • IT mode firmware
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Conrollers
  • Intel® X540 Dual Port 10GbE
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC     
Input / Output
SAS
  • 16 SAS3 (12Gbps) ports
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
  • 2 USB 2.0 ports (rear)
  • 1 Type A
VGA
  • 1x VGA port
Serial Port/Header
  • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-829HTS-R1K02LPB
Dimensions and Weight
Height
  • 3.5" (89mm)
Width
  • 17.2" (437mm)
Depth
  • 25.5" (647mm)
Weight
  • Gross Weight: 58 lbs (26.3 kg)
  • Net Weight: 34 lbs (15.4 kg)
Available Color
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2 Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 slot
  • 6 PCI-E 3.0 x8 slots
Drive Bays
Hot-swap
  • 16x 3.5" Hot-swap SAS3 drive bays
Optional
  • 2x 2.5" Hot-swap SATA drive bays (rear)
Backplane
  • SAS3 expander per backplane
System Cooling
Fans
  • 4x 8cm hot-swap redundant PWM cooling fans
Power Supply with Power Distributor

1000W Redundant Power Supplies with PMBus

Total Output Power
  • 800W/1000W
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 - 7A / 50-60Hz
  • 200-240Vac / 7 - 5A / 50-60Hz
  • 200-240Vdc / 7 - 5A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 83A / Min: 0A (200-240Vac)
  • Max: 83A / Min: 0A (200-240Vdc)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification
  • 80 Plus Titanium
  • UL/cUL/CB/BSMI/CE/CCC
  • Titanium Certified
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)            
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

Product Attachments

View FileSupermicro 6028TP-DNCR User Manual    Size: (36.17 MB)

 

Sign Up to Our Free Newsletter for Expert Information & News