Supermicro C7Z87-O

1. Single socket H3 (LGA 1150) supports
Intel® 4th gen. Core i7/i5/i3 processors
2. Intel® Z87 Chipset
3. Up to 32GB DDR3 non-ECC 1600MHz
UDIMM in 4 sockets; Overclocking*
support up to 3000MHz
4. Dual Gigabit Ethernet LAN ports
(1x Intel® i217V & 1x Intel® i210AT)
5. 8x SATA3 (6Gbps)
6. 2 (x16) PCI-E 3.0, 3 (x1) PCI-E 2.0,
and 2 5V PCI 32-bit slots
7. 6x USB 3.0 (2 rear + 4 via headers)
10x USB 2.0 (4 rear + 6 via headers)
8. HD Audio 7.1 channel connector by
Realtek ALC1150
9. 1x DOM power connector and
1x SPDIF Out Header
10. UEFI BIOS support

Price available upon request.

Product Specifications

Supermicro C7Z87-O Features

Product SKUs
  MBD-C7Z87                                                                                                                           -O
   
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 9.6", (30.48cm x 24.4 cm)
Processor/Cache
CPU
  • Intel® 4th Gen Core i7/i5/i3 processors                            
  • Single Socket H3 (LGA 1150)
Cores / Cache
  • N/A
System Bus
  • N/A
Notes
  • None
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32GB  DDR3 Non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support overclocking up to 2133MHz* / 2200MHz* / 2400MHz* / 2600MHz* / 2800MHz* / 3000MHz*
    * Please check the operation manual for supported components
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5V, 1.35V
Error Detection
  • None
On-Board Devices
Chipset
  • Intel® Z87 Chipset
AHCI SATA
  • SATA3 via PCH w/ RAID 0, 1, 5, 10
  • SATA3 via ASM1061®
SCU SATA
  • None
SAS
  • None
IPMI
  • None
Network Controllers
  • Intel® i217V + Intel® i210AT Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • None
Audio
  • RealTek ALC1150 High Definition Audio
Input / Output
SATA
  • 6x SATA3 (6Gbps) ports via PCH
  • 2x SATA3 (6Gbps) ports via ASM1061®
  • Total of 8x SATA3 ports (6Gbps
SAS
  • None
NVMe
  • None
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
USB
  • 6x USB 3.0 ports (2 rear, 4 via headers)
  • 10x USB 2.0 ports (4 rear, 6 via headers)
Audio
  • 7.1 HD Jacks
DOM
  • SATA DOM (Disk on Module) power connector support
TPM
  • TPM header, 2x Type B 1394a headers, PS/2 connector for mouse and keyboard
Video
  • 1x VGA, 1x HDMI, 1x DVI, 1x Display port
Serial Port            2x COM ports (headers)
Chassis
Mid-Tower:
  • CSE-732D4F-500B                                      
  • CSE-732D4F-865B                                           
  • CSE-732G-903B   
  • CSE-733TQ-665B
   
4U / Tower Chassis:
Important Chassis Notes: To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended.  Please talk to your sales representative for details.
Expansion Slots

PCI-Express

PCI

  • 2 (x16) PCI-E 3.0 slots -   Function as: 16/NA or 8/8
  • 3 (x1) PCI-E 2.0 slots
  • 2 PCI 5V 32-bit slots
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI (SMBIOS) 2.7
  • ACPI 5.0
  • USB Keyboard support
Management
Software
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of five 4-pin fan headers supporting up to 5 fans
  • 5x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
   
   
   
   

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News