Supermicro X10DRD-iNT

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
2. Intel® C612 chipset
3. Up to 1TB ECC 3DS LRDIMM , up to DDR4- 2400MHz ; 8x DIMM slots
4. Expansion slots: 4x PCI-E 3.0 x8
5. Intel® X540 Dual port 10GBase-T
6. 10x SATA3 (6Gbps) ports; RAID 0, 1, 5, 10
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 7x USB 2.0 ports (4 rear, 2 via headers, 1 Type A)
10. 2x Internal NVMe ports (PCI-E 3.0 x4)

Price available upon request.

Product Specifications

Product SKUs
MBD-X10DRD-iNT -O
  • X10DRD-iNT (Standard Retail Pack)
MBD-X10DRD-iNT -B
  • X10DRD-iNT (Bulk Pack)
Physical Stats
Form Factor
  • E-ATX
Dimensions
  • 13.05" x 10.5" (33.1cm x 26.7cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP**)                   
  • Dual Socket R3 (LGA 2011)
Cores/Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note

**Motherboard supports this maximum TDP, Please verify your system can thermally support

Note

BIOS version 2.0 or above is required

System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC 3DS LRDIMM, 256GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
dIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
AHCI SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • Aspeed AST2400 BMC
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
NVMe
  • 2x Internal NVMe ports (PCI-E 3.0 x4)
LAN
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 7x USB 2.0 ports total (4 rear, 2 via headers, 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 2x COM Ports (1 rear, 1 header)
DOM
  • 2x SuperDOM (Disk on Module) ports
TPM
  • 1x TPM Header
Chassis (Optimized for X10DRD-i)
1U Chassis:
  • SC514-441
  • SC514-R400C
  • SC514-505
  • SC813LT-350CB
  • SC813LT-R500CB
Important Chassis Note

To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended.  Please talk to your sales representative for details.

Expansion Slots
PCI-E
  • 4x PCI-E 3.0 x8 slots
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • Intel Node Manager
  • IPMI 2.0
  • NMI
  • SuperDoctor® 5
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, +3.3V Standby, VBAT, Memory Voltages.
  • 6 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temparature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • RoHS
Operating Environment
Operating Temparature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temparature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

Product Attachments

View FileSupermicro X10DRD User Manual    Size: (9.34 MB)

Sign Up to Our Free Newsletter for Expert Information & News