Supermicro X9SRH-7TF

1. Single socket R (LGA 2011) supports Intel Xeon processor E5-2600/1600 and E5-2600/1600 v2 family
2. Intel® C602J chipset (7 years long life)
3. Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM slots
4. Expansion slots: 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 2.0 x4 (in x8), & 2 PCI-32 slots
5. Intel® X540 Dual port 10GBase-T
6. 2 SATA3 (6Gb/s), 4 SATA2 (3Gb/s)
7. 8x SAS2 (6Gb/s) ports via LSI 2308
8. Integrated IPMI 2.0 and KVM with dedicated LAN
9. 9 USB 2.0 ports (2 rear + 6 via header + 1 Type A)
10. DOM power connector support

Price available upon request.

Product Specifications

Product SKUs
 SKU
  • MBD-X9SRH-7TF-B
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 9.6" (30.5cm x 24.4cm)
Processor/Cache
CPU
  • Single Socket R (LGA 2011)
  • Intel Xeon processor E5-2600/1600    
  • E5-2600/1600 v2 family (up to 12 cores and up to 135W)
Notes
  • BIOS version 3.0 or above is required 
  • E5-1600 series CPU does not  support LRDIMM type memory
System Memory
Memory Capacity
  • 8x 240-pin DDR3 DIMM slots
  • Up to 512GB DDR3 ECC LRDIMM
  • Up to 256GB DDR3 ECC RDIMM
  • Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,  64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors   (using ECC memory)
On-Board Devices
Chipset
  • Intel C602J chipset (7 Years Long Life)
SATA
  • SATA3 (6Gb/s) and SATA2 (3Gb/s)
  • RAID 0, 1, 5, 10
SAS
  • SAS2 (6Gb/s) via LSI 2308
  • SW RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450RA0BX
  • Intel Node Manager support
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16MB DDR2 graphics
Super I/O
  • Nuvoton NCT 6776F
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 10GbE LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 9 USB 2.0 ports total (2 rear + 6 via header + 1 Type A)
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Video
  • 1 VGA port
Serial Port
  • 2 serial ports (1 rear, 1 header)
Chassis
1U Chassis
2U Chassis
4U / Tower Chassis
  • CSE-842TQ-665B
  • CSE-842TQ-865B
Important Chassis Notes
  • To support motherboards based on Intel Xeon processor 5500/3500 series, Revision K or later chassis is recommended for most models.
Expansion Slots

PCI-Express

  • 1x PCI-E 3.0 x16 slot
  • 1x PCI-E 3.0 x8 (in x16) slot
  • 1x PCI-E 2.0 x4 (in x8) slot

PCI

  • 2x PCI-32 slots
System BIOS
BIOS Type
  • 64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.7.1
  • UEFI 2.3.1
  • RTC (Real Time Clock) Wakeup
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / APM Power Management
  • Keyboard Wakeup from Soft-Off
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
  • Five 4-pin fan headers supporting up to 5 fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • Chipkill support
  • RoHS, Halogen Free

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News