Supermicro 1018GR-T

1. Single socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v4 / v3 family;
QPI up to 9.6GT/s
2. Up to 1TB ECC 3DS LRDIMM , up to DDR4- 2400 MHz ; 16x DIMM slots
3. 2x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards), 1x PCI-E 3.0 x8 low-profile slot
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Intel i350 Dual port GbE LAN
6. 6x 2.5" Hot-swap drive bays
7. 1400W High-efficiency Power Supply, Platinum Level (94%+), Digital Switching Control &
PMBus 1.2
8. 10x Counter rotating fans w/ optimal fan speed control
9. Smart server management tools

Price available upon request.

Product Specifications

Product SKUs
SYS-1018GR-T
Motherboard
Super X10SRG-F
Processor/Cache
CPU
  • Intel Xeon processor E5-2600 v4 / v3 family (up to 145W TDP)*
  • Single Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes * Please contact Technical Support for additional
information about frequency optimised CPUs and specialised system optimisation.
   
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC 3DS LRDIMM
  • Up to 512GB ECC LRDIMM
  • Up to 512GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes
  • 3DS LRDIMM: 128GB
  • LRDIMM: 64GB, 32GB
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel C612 chipset
SATA
  • SATA3 (6Gbps) via C612 controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 6x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (rear)
Video
  • 1x VGA Connector
Serial Port
  • 1x Serial header
DOM
  • 2x DOM (DIsk on Module) power connectors
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Operating Environment / Compliance
RoHs RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-118GTS-1K43BP
Dimensions and Weight
Weight
  • Net Weight: 28 lbs (12.7 kg)
  • Gross Weight: 36 lbs (16.33kg)
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 28.5" (724mm)
Available Colour
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards)
  • 1x PCI-E 3.0 x8 slot for I.B. card
Drive Bays
Hot-swap
  • 6x 2.5" Hot-swap drive bays
System Cooling
Fans
  • 8x counter-rotating fans with optimal fan speed control
Power Supply

  • 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
Total Output Power
  • 1000W/1600W
AC Voltage
  • 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
  • 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5 standby
  • 6 Amp
+12V
  • 100 Amp/115 Vac
  • 117 Amp/230 Vac
With Power Distibutor
  • +5V: 14 Amp
Certification 80+ Platinum Level
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • CPU Core 5 Phase-switching voltage regulator
FAN
  • Total of eight 4-pin PWM fans
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 9x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • SDDC Support

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News