Supermicro 5037A-T

1. Intel® 2nd Generation Core i7/i5/i3,
Pentium, Celeron processors
supported; LGA 1155
2. Up to 32GB 1333/1066MHz non-ECC
DDR3 UDIMMs on 4 DIMM slots
3. 1 (x16) PCI-E 2.0 (x8 if slot 4 is used),
1 (x8) PCI-E 2.0 (in x16), 3 (x1) PCI-E
2.0, and 2 32-bit PCI slots
4. Realtek RTL8111E Dual port GbE LAN 5. 2x USB 3.0 ports, 12x USB 2.0 ports
(8 rear, 4 ports via internal headers)
6. 4x 3.5" internal SAS/SATA HDD Bays
90° rotatable HDD cage design
4x 2.5" internal SAS/SATA HDD (opt.)
7. 500W High-efficiency Power Supply

Price available upon request.

Product Specifications

Product SKUs
  SYS-5037A-T
Motherboard
MBD-C7P67 -O
Processor/Cache
CPU
  • Socket H2 (LGA 1155)
  • Intel® 2nd Generation Core i7/i5/i3, Pentium, Celeron processors supported
Cores / Cache
  • N/A
System Bus
  • N/A
Notes
  • None
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM slots
  • Supports up to 32 GB DDR3 non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Memory Voltage
  • 1.5 V
Error Detection
  • N/A
On-Board Devices
Chipset
  • Intel® P67 Express chipse
SATA
  • Intel P67, Marvell 88SE9128
IPMI
  • None
Network Connectivity
  • Realtek RTL8111E Gigabit Ethernet LAN, 2x Gigabit LAN ports
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
  • REALTEK ALC889 7.1 HD Audio with optical S/PDIF
Input / Output
SATA
  • 4 SATA 3.0 ports (6Gbps); RAID 0, 1
  • 4 SATA 2.0 ports (3Gbps); RAID 0, 1, 5, 10
SAS
  • None
NVMe
  • None
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB 3.0 ports
  • 12x USB 2.0 ports (8 rear, 4 ports via 2 internal headers)
Audio
  • Line-in / Line-out / Microphone Ports; optical S/PDIF port
Serial Port
  • 2x Fast UART 16550 serial port
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI UEFI BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • RTC (Real time Clock) Wakeup
  • 3TB HDD Support
Management
Software
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • Mid-Tower
Model
  • CSE-732D2-500B
Dimensions and Weight
Height
  • 16.7" (424 mm)
Width
  • 7.6" (193 mm)
Depth
  • 20.68" (525.3 mm)
Weight
  • Net Weight: 27.5 lbs (12.47 kg)
  • Gross Weight: 33 lbs (14.97 kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • Hard drive activity LED
  • Network activity LED
  • System Overheat LED
Expansion Slots

PCI-Express

PCI

  • 1 (x16) PCI-E 2.0 (x8 if slot 4 is used)
  • 1 (x8) PCI-E 2.0 (in x16)
  • 3 (x1) PCI-E 2.0
  • 2 32-bit PCI slots
Drive Bays

Hot-swap

Peripheral

  • 4x 3.5" SATA HDD Bays
  • Enterprise SATA HDD only recommended
  • 2x 5.25" peripheral drive bays
  • 1x 3.5" peripheral drive bay
System Cooling
Fans
  • 1x 12cm (1850rpm) front cooling fan (opt.)
  • 1x 12cm (1850rpm) rear exhaust fan
  • Optimized Cooling Technology at 21dB Whisper-Quiet Operatio
Air Shroud
  • None
Power Supply
500W AC power supply w/ PFC
AC Input
  • 100 - 240V, 50-60Hz, 7-3.5 Amp
+12V
  • 17 Amp
+5V
  • 20 Amp
Certification
  • 80+ Bronze Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of 4 fan headers supporting up to 4 fans; four 4-pin fan headers
  • 4x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News