Supermicro 6017R-NTF

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family† 2. Up to 1TB ECC DDR3, up to
1866MHz; 16x DIMM sockets
3. Add on card support: 2x PCI-E 3.0 x16
full-height, Half-length slots
4. Intel® i350 Dual port Gigabit Ethernet
Controller; 2x LAN ports
5. 4x 3.5" Hot-swap SAS/SATA2 HDD
Bays Connected to onboard storage
controller
6. 600W High-efficiency Power Supply
Platinum Level (94%

Price available upon request.

Product Specifications

Product SKUs
  SYS-6017R-NTF
Motherboard
MBD-X9DRW-iF -O
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600     and E5-2600 v2 family     (up to 130W TDP)
Cores / Cache
  • Up to 30MB
System Bus
  • Up to 30MB
Notes
  • † BIOS version 3.0 or above is required
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC Registered memory (RDIMM)
  • Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 Chipset
SATA
  • Via Cable for SATA controller
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Renesas SH7757 BMC
Network Connectivity
  • Intel® i350 Dual Port Gigabit Ethernet Controller
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • G200 (Renesas SH7757 BMC)
Input / Output
SATA
  • 4x SATA 2.0 ports (3Gbps)
SAS
  • None
NVMe
  • None
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 6x USB 2.0 ports total (4x rear + 2x via header)
Video
  • 1x VGA port
Serial Port
  • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS resuce hot keys
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 1U Rackmount
Model
Dimensions and Weight
Height
Width
  • 17.2" (437mm)
Depth
  • 25.6" (650mm)
Weight
  • 46 lbs (20.9kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots
PCI-Express
  • 2 PCI-E 3.0 x16 full-height, Half-length slots
  • UIO AOC Compatibility Matrix
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap
  • 4x 3.5" Hot-swap SAS/SATA2 HDD Bays (connected to onboard storage controller)
System Cooling
Fans
  • 5x 4cm Counter-rotating PWM fans
Air Shroud
  • None
Power Supply
600W AC power supply w/ PFC (24-pin)
AC Input 100-240 V, 50-60 Hz, 7.5 Amp max
+12V
  • 49 Amp
12V SB
  • 0.5 Amp
Certification 80+ Platinum Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 6x 4-pin fan headers
  • 6x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED indicator
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • Dual cooling zones
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    5°C to 35°C (41°F to 95°F)
  • Non-operating Temperature:    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News