Supermicro 6018R-MT

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 512GB ECC DDR4, up to
2133MHz; 8x DIMM slots
3. 1x PCI-E 3.0 x8 FHHL Expansion slot
4. Intel® i210 Dual port Gigabit Ethernet
5. IPMI 2.0 + KVM with Dedicated LAN
6. 4x 3.5" Hot-swap SATA3 HDD Bays
7. I/O ports: 2x SuperDOM, 1x VGA,
1x COM, 2x USB 3.0, 2x USB 2.0
8. 440W/480W High-efficiency PSU
Platinum Level Certified
9. *Note: SYS-6018R-MT-BULK
Available as Cost Optimized, Bulk
Packing - 10 systems in one carton

Price available upon request.

Product Specifications

Product SKUs
  SYS-6018R-MT
Motherboard

MBD-X10DRL-i -O

Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP)
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Notes ** Motherboard supports this maximum TDP. Please verify your
system can thermally support.
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Connectivity
  • Intel® i210 Gigabit Ethernet controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA 10x SATA3 (6Gbps) ports
DOM
  • DOM (Disk on Module) power connector
TPM
  • 1x TPM 1.2 20-pin Header
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (2 rear + 2 via header)
  • 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
Video
  • 1x VGA port
Serial Port
  • 2x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 1U Rackmount
Model
Dimensions and Weight
Height
  • 17.2" (437mm)
Width
  • 1.7" (43mm)
Depth
  • 19.8" (503mm)
Weight 36 lbs (16.33kg)
Available Color
  • Black
Front Panel
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x8 Full-height Half-length
Drive Bays
Hot-swap
  • 4x 3.5" Hot-swap SATA HDD trays
System Cooling
Fans
  • 4x 4cm Heavy duty PWM cooling fans
Air Shroud
  • None
Power Supply
440W/480W AC power supply with PFC
AC Input
  • 100-140 V, 5.5-4 Amp 50-60 Hz
  • 180-240 V 3.5-2.5 Amp 50-60 Hz
+12V
  • 38.8A at 100-140Vac
  • 39.1A at 180-240Vac
12V SB
  • N/A
Certification 80+ Platinum Certified
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
  • Dual Cooling Zones
Operating Environment / Compliance
RoHs
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:    5% to 95% (non-condensing)

How to Order

To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

Tel: 01438 842 300
Email: sales@tmc-uk.com

There are no downloads available.

 

Sign Up to Our Free Newsletter for Expert Information & News