Supermicro 2028U-TRTP+

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 1.5TB ECC, up to DDR4 2133MHz;
24x DIMM slots
3. 1x PCI-E 3.0 x16 slot (FH, 10.5" L),
7x PCI-E 3.0 x8 slots (5x FH, 10.5" L,
1x LP, 1x Internal LP)
4. 2x 10G SFP+ ports
5. 24x Hot-swap 2.5" Drive Bays:
10x SATA3 ports by default;
Optional drive support: 24x SAS3
6. 4x heavy duty fans w/ optimal
fan speed control
7. 1000W High efficiency (96%)
Redundant PSU; Titanium Level

Price available upon request.

Product Specifications

  • Product SKUs
  •   SYS-2028U-TRTP+
    Motherboard
    MBD-X10DRU-i+ -B
    Processor/Cache
    CPU
    • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
    • Dual Socket R3 (LGA 2011)
    Cores / Cache
    • Up to 18 Cores / Up to 45MB Cache
    System Bus
    • QPI up to 9.6 GT/s
    Notes * Please contact Supermicro Technical Support for additional
    information about frequency optimized CPUs and specialized system
    optimization.
    System Memory
    Memory Capacity
    • 24x 288-pin DDR4 DIMM slots
    • Up to 1.5TB ECC LRDIMM, RDIMM
    Memory Type
    • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
    DIMM Sizes
    • 64GB, 32GB, 16GB, 8GB, 4GB
    Memory Voltage
    • 1.2 V
    Error Detection
    • Corrects single-bit errors
     
    On-Board Devices
    Chipset
    • Intel® C612 chipset
    SATA
    • SATA3 (6Gbps) with RAID 0, 1, 5, 10
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • ASPEED AST2400 BMC
    Network Connectivity
    Graphics
    • ASPEED AST2400 BMC
    Input / Output
    SATA
    • 10x SATA3 (6Gbps) ports
    SAS
    • 24x SAS3 ports support via optional Add-on Cards
    DOM
    • 2x SuperDOM (Disk on Module) ports
    LAN
    • 2x 10G SFP+ ports
    • 1x RJ45 Dedicated IPMI LAN port
    USB
    • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
    Video
    • 1x VGA Connector
    Serial Port
    • 1x Serial header
    System BIOS
    BIOS Type
    • 128Mb SPI Flash EEPROM with AMI BIOS
    BIOS Features
    • Plug and Play (PnP)
    • APM 1.2
    • PCI 2.3
    • ACPI 1.0 / 2.0 / 3.0 / 4.0
    • USB Keyboard support
    • SMBIOS 2.7.1
    • UEFI 2.3.1
    Management
    Software
    • SuperDoctor® 5
    • Intel® Node Manager 3.0
    • Watch Dog
    • NMI
    • SMCBU and SMM
    • Optional IPMI 1.5 / 2.0
    Power Configurations
    • ACPI Power Management
    • Power-on mode for AC power recovery
    Chassis
    Form Factor
    • 2U Rackmount
    Model
    • CSE-219UAC-R1K02
    Dimensions and Weight
    Height
    • 3.5" (89mm)
    Width
    • 17.2" (437mm)
    Depth
    • 27.76" (705.3mm)
    Weight
    • Net Weight: 36 lbs (16.4 kg)
    • Gross Weight: 72 lbs (32.7 kg)
    Available Color
    • Black
    Front Panel
    LEDs
    • Power status LED
    • HDD activity LED
    • 2x Network activity LEDs
    • System information (overheat/UID) LED
    Expansion Slots
    PCI-Express
    • 1x PCI-E 3.0 x16 slot (FH, 10.5" L)
    • 7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP)
      (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
    Drive Bays
    Hot-swap
    • 4x 8cm heavy duty PWM fans
    System Cooling
    Fans
    • 4x 8cm heavy duty PWM fans
    Air Shroud
    • None
    Power Supply
    1000W Titanium Level (96%) High-efficiency Redundant Single Output Power
    Supplies
    AC Input
    • 100-127 V, 50-60 Hz
    • 200-240 V, 50-60 Hz
    +12V
    • Max: 62.5A & Min: 0A (100Vac-127Vac)
    • Max: 83A (200Vac-240Vac)
    12V SB
    • Max: 2.1A
    Certification
    • 80+ Titanium Level
    PC Health Monitoring
    Voltage
    • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
    • 5+1 Phase-switching voltage regulator
    FAN
    • 8x 4-pin fan headers
    • Status monitor for speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • Thermal Control for 8x Fan Connectors
    • Thermal Monitor 2 (TM2) support
    • PECI
    LED
    • Memory DIMM ECC error LEDs
    • CPU / System Overheat LED
    • Suspend static indicator LED
    • UID/Remote UID
    Other Features
    • 4x 8-pin GPU power connectors
    • Chassis intrusion detection
    • Chassis intrusion header
    • SDDC Support
    Operating Environment / Compliance
    RoHs
    • RoHS Compliant
    Environmental Spec.
    • Operating Temperature:    10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:    -40°C to 60°C (-40°F to 140°F)
    • Operating Relative Humidity:    8% to 90% (non-condensing)
    • Non-operating Relative Humidity:    5% to 95% (non-condensing)

    How to Order

    To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

    Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

    Tel: 01438 842 300
    Email: sales@tmc-uk.com

    There are no downloads available.

     

    Sign Up to Our Free Newsletter for Expert Information & News