| Wattage |
|---|
| 760W |
| Dimensions |
|---|
| 265x101x125(mm) 10.43x3.98x4.92(inch) |
| Input Specification |
|---|
| VOLTAGE: 90V ~ 264VAC FREQUENCY: 47Hz ~ 63Hz INPUT CURRENT: 20-10A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 60/100A @ 115/230VAC (25℃) POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD |
| Features |
|---|
| TEMPERATURE RANGE: OPERATING: 0℃ --- 40℃ STORAGE: -20℃ --- 80℃ HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95% REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE DIELECTRIC WITHSTAND: INPUT / OUTPUT 3000 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND EFFICIENCY: 65% TYPICAL AT 115VAC FULL LOAD POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms OVER POWER PROTECTION: 110% ~ 180% OVER VOLTAGE PROTECTION: +5V -> 5.7V ~ 6.5V, 3.3V ->3.9V ~ 4.7V +12V -> 13.3V ~ 14.3V OVER CURRENT PROTECTION: 110% ~ 180% SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950 REMOTE ON / OFF CONTROL THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE. 3.3V REMOTE SENSING |
| DC Output Specification |
|---|
| Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noice Max.[P-P] |
|---|---|---|---|---|---|
| 5V | 4 | 48 | ± 5% | ± 50mV | 70mV |
| 12V | 0.2 | 1 | +5%, -10% | ± 50mV | 120mV |
| -5V | 5 | 50 | ± 6% | ± 50mV | 120mV |
| -12V | 0.2 | 1.5 | +5%, -10% | ± 50mV | 120mV |
| 3.3V | 4 | 45 | ± 5% | ± 50mV | 70mV |
| +5VSB | 0.4 | 3.5 | +5%, -6% | ± 50mV | 70mV |
| Remarks: |
|---|
| * THE OUTPUT POWER OF 5V AND 3.3V MAX:40A |
| * EACH POWER MODULE OUTPUT MAX:420W , TOTAL OUTPUT POWER MAX:760W |
* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY REGULATIONS.
To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.
Alternatively, you can call or email us and speak to one of our experienced technical sales team.
Tel: 01438 842 300
Email: sales@tmc-uk.com
There are no downloads available.