| Wattage |
|---|
| 600W |
| Dimensions |
|---|
| 276x101x82(mm) 10.87x3.98x3.23(inch) |
| Input Specification |
|---|
| VOLTAGE: FULL RANGE 100~240 VAC FREQUENCY: 50Hz/60Hz (+/-3Hz) STEADY-STATE CURRENT: 9.0~4.0 AMPS MAXIMUM AT ANY LOW/HIGH RANGE INPUT VOLTAGE INRUSH CURRENT: 35A/70A @ 115/230 VAC POWER FACTOR CORRECTION: PHC CAN REACH THE TARGET OF 95% @ 230V, FULL LOAD |
| Features |
|---|
| TEMPERATURE RANGE: OPERATING: 0 ℃ ~ 40 ℃, STORAGE: -20 ℃ ~ 80 ℃ HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE EFFICIENCY: >80% TYPICAL AT 115V, 20~100% MAX LOAD POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms OVER POWER PROTECTION: 110~180% OVER VOLTAGE PROTECTION: +5V: 5.9~6.7V, +3.3V: 3.9~4.3V, +12V: 13~15V OVER CURRENT PROTECTION: +3.3V: 27.5~37.5A, +5V: 27.5~37.5A, +12V: 52.8~76.8A SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V SAFETY: TO MEET UL, CUL, TUV, CCC REMOTE ON/OFF CONTROL WARNING METHOD: AUDIO ALARM, FAULT LED, TTL |
| DC Output Specification |
|---|
| Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noice Max.[P-P] |
|---|---|---|---|---|---|
| 5V | 0.5 | 25 | ±5% | ±50mV | 50mV |
| 12V | 2.0 | 48 | ±5% | ±120mV | 120mV |
| -5V | N/A | N/A | N/A | N/A | N/A |
| -12V | 0.2 | 0.8 | ±10% | ±120mV | 120mV |
| 3.3V | 0.5 | 25 | ±5% | ±50mV | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±50mV | 50mV |
| Remarks: |
|---|
| * TOTAL OUTPUT MAX: 600W |
| * +5V AND +3.3V TOTAL OUTPUT MAX: 170W |
* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY REGULATIONS.
To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.
Alternatively, you can call or email us and speak to one of our experienced technical sales team.
Tel: 01438 842 300
Email: sales@tmc-uk.com
There are no downloads available.