How can we help? LIVE CHAT

  1. Home
  2. Supermicro 6018R-MTR | TMC

Supermicro 6018R-MTR | TMC

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 512GB ECC DDR4, up to
2133MHz; 8x DIMM slots
3. 1x PCI-E 3.0 x8 FHHL Expansion slot
4. Intel® i210 Dual port Gigabit Ethernet
5. IPMI 2.0 + KVM with Dedicated LAN
6. 4x 3.5" Hot-swap SATA3 HDD Bays
7. I/O ports: 2x SuperDOM, 1x VGA,
1x COM, 2x USB 3.0, 2x USB 2.0
8. 400W Redundant Power Supplies
Gold Level Certified
9. *Note: SYS-6018R-MTR-BULK
Available as Cost Optimized, Bulk
Packing - 10 systems in one carton

Price available upon request.

Product Specifications

  • Product SKUs
    •
      SYS-6018R-MTR
    Motherboard
    MBD-X10DRL-i -O
    Processor/Cache
    CPU
    • Intel® Xeon® processor E5-2600 v3 family (up to 135W TDP) *
    • Dual Socket R3 (LGA 2011)
    Cores / Cache Up to 18 Cores / Up to 45MB Cache
    System Bus
    • QPI up to 9.6 GT/s
    Notes * Please contact Supermicro Technical Support for additional
    information about frequency optimized CPUs and specialized system
    optimization.
    System Memory
    Memory Capacity
    • 8x 288-pin DDR4 DIMM slots
    • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
    Memory Type
    • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
    DIMM Sizes
    • RDIMM: 32GB, 16GB, 8GB, 4GB
    • LRDIMM: 64GB, 32GB
    Memory Voltage
    • 1.2 V
    Error Detection
    • Corrects single-bit errors
    On-Board Devices
    Chipset
    • Intel® C612 chipset
    SATA
    • I-SATA 4 & I-SATA 5 support SATA DOM
    • SATA3 (6Gbps); RAID 0, 1, 5, 10
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • ASPEED AST2400 BMC
    Network Connectivity
    • Intel® i210 Gigabit Ethernet controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    • 1x Realtek RTL8211E PHY (dedicated IPMI)
    Graphics
    • Intel® i210 Gigabit Ethernet controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    • 1x Realtek RTL8211E PHY (dedicated IPMI)
    Input / Output
    SATA
    • 4x SATA3 (6Gbps) ports
    SAS
    • None
    DOM
    • 2x SuperDOM (Disk on Module) ports
    LAN
    • 2x RJ45 Gigabit Ethernet LAN ports
    • 1x RJ45 Dedicated IPMI LAN port
    USB
    • 2x USB 3.0 ports (rear)
    • 2x USB 2.0 ports (rear)
    • 1x Type A
    Video
    • 1x VGA port
    Serial Port
    • 1x Fast UART 16550 port / 1 Header
    System BIOS
    BIOS Type
    • 128Mb SPI Flash EEPROM with AMI BIOS
    BIOS Features
    • Plug and Play (PnP)
    • APM 1.2
    • PCI 2.3
    • ACPI 3.0 / 4.0
    • USB Keyboard support
    • SMBIOS 2.7.1
    • UEFI 2.3.1
    Management
    Software
    Power Configurations
    • ACPI Power Management
    • Power-on mode for AC power recovery
    Chassis
    Form Factor
    • 1U Rackmount
    Model
    Dimensions and Weight
    Height
    • 17.2" (437mm)
    Width
    • 1.7" (43mm)
    Depth
    • 19.8" (503mm)
    Weight
    • 38 lbs (17.24kg)
    Available Color
    • Black
    Front Panel
    LEDs
    • Power status LED
    • HDD activity LED
    • 2x Network activity LEDs
    • Universal Information (UID) LED
    Expansion Slots
    PCI-Express
    • 1x PCI-E 3.0 x8 Full-height Half-length
    Drive Bays
    Hot-swap
    • 4x 3.5" Hot-swap SATA HDD trays
    System Cooling
    Fans
    • 4x 4cm 17.5K RPM PWM fans
    Air Shroud
    • None
    Power Supply
    400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with
    PMBus and I2C
    AC Input
    • 400W: 100-240 V, 50-60 Hz, 6-3 Amp
    +12V
    • 33 Amp
    5V SB
    • 3 Amp
    Certification
    • 80+
    PC Health Monitoring
    Voltage
    • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
    • 5 Phase-switching voltage regulator
    FAN
    • 8x 4-pin fan headers (up to 8 fans)
    • 8x fans with tachometer monitoring
    • Status monitor for speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • Thermal Control for 8x Fan Connectors
    • Thermal Monitor 2 (TM2) support
    • PECI
    LED
    • CPU / System Overheat LED
    • Suspend static indicator LED
    • UID/Remote UID
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
    • RoHS, Halogen Free
    • Dual Cooling Zones
    Operating Environment / Compliance
    RoHs
    • RoHS Compliant
    Environmental Spec.
    • Operating Temperature:    10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:    8% to 90% (non-condensing)
    • Non-operating Relative Humidity:    5% to 95% (non-condensing)

    How to Order

    To place an order, please make an enquiry using the 'Request More Information' form at the bottom of the page and one of our experienced sales team will contact you shortly.

    Alternatively, you can call or email us and speak to one of our experienced technical sales team. 

    Tel: 01438 842 300
    Email: sales@tmc-uk.com

    There are no downloads available.

     

    Sign Up to Our Free Newsletter for Expert Information & News